A unique website dedicated to fishing information from Florida's Northern Big Bend. This includes the area from the Econfina River west to the Apalachicola River
We have a few access hatches that are leaking water into the compartments below. We have replaced the door gasket and that did not work. We think the problem lies in the seal between the deck and the hatch. So we need to pull them up and reseal them. Does anyone have any suggestions on the best type sealant to use? Its a fiberglass deck and plastic hatch. I have thought of 3M 5200, but is this the best thing to use or is there something better? Any suggestions or tips would be appreciated.
5200 is the way to go IMO. I'd use the fast cure this time of year.
These hatches are known for leaking though, and don't know if resealing to the deck will do any good. It's worth a shot though. The o-ring rubber seal they use doesn't seal very well, and I suspect it is still your problem.
I agree with Nathan. Seal the hatch shut with 5200 and it will never leak again........Of course, if you ever want to open it again you'll probably have to come back and ask for new ideas.
