14' boat w/ 25 evinrude

killswitch · Post by **killswitch** » June 15th, 2006, 9:55 pm

1997 14' custom built fiberglass v-hull boat, 25 HP Evinrude w/ electric start and new prop, galvanized trailer.
Boat has 2 livewells, storage compartment, small front deck, a large fiberglass removeable rear deck, and a bimini top. Excellent river or flats boat. $ 1,950.00 Boat in excellent condition and motor runs great.

Post by **salty tiger** » June 16th, 2006, 9:58 am

Any pictures?

killswitch · Post by **killswitch** » June 16th, 2006, 1:19 pm

Pictures are available.......a buddy of mine has them and can e-mail them to anyone interested. Thanks

Post by **Redbelly** » June 17th, 2006, 2:16 pm

pm sent

Post by **bman** » June 17th, 2006, 10:10 pm

I sent you pm a few days ago

Sent me photos too-
barry@barrybevis.com

killswitch · Post by **killswitch** » June 19th, 2006, 10:38 am

Just got back into town and headed to work now.......went to Ecofina.

Report to follow later. Called my buddy and he should be sending pics later. Thanks

Post by **bman** » June 22nd, 2006, 9:38 am

KillSwitch sent me some photos and I'm posting them for the rest of you.
I have not seen the boat and have no relation to the seller!

killswitch · Post by **killswitch** » August 7th, 2006, 5:17 pm

still available.............been running it about every other weekend.

and reduced to $1,850.00

killswitch · Post by **killswitch** » September 27th, 2006, 7:48 pm

Finally got the motor cover painted...............Evinrude blue. Looks a lot better now.

It had a bad case of the peels.

Post by **Redbelly** » September 27th, 2006, 7:57 pm

Are you supposed to lay on that deck to drive it?

killswitch · Post by **killswitch** » September 27th, 2006, 10:26 pm

That was my question also when I bought the boat. However, there is another bench seat under the deck and the deck is not attached. Heavy as he** but removeable. I have never used it because of the driving and weight issue. A couple of sawhorses and it makes a pretty good little table.

The person who built the boat for himself owns a bass boat company, so I suppose there was plenty of fiberglass to go around.

killswitch · Post by **killswitch** » March 14th, 2007, 10:15 pm

let the ad slip waaaaay down..........boat still available.

BigBendFishing.Net

14' boat w/ 25 evinrude

14' boat w/ 25 evinrude

Some photos