Any opinions on ETECs?
Moderators: bman, Chalk, Tom Keels
- seatrout99
- Site Sponsor
- Posts: 1069
- Joined: January 16th, 2002, 8:00 pm
- Location: Climax, GA
- Contact:
Redbelly, next time you are on the water take an additional 54 lbs with you and set it next to/or on the motor on the transom. That will tell you the drafting difference. Don't know the setup of your boat but if you could place a bucket or cooler next to the transom it will help you decide. 6.5 gallons of water is about 54 lbs in a cooler would work well. or about 66 cans of beer.
- seatrout99
- Site Sponsor
- Posts: 1069
- Joined: January 16th, 2002, 8:00 pm
- Location: Climax, GA
- Contact:
Reminds me of that song..."66 cans of beer on the transom!"..leonreno wrote:Redbelly, next time you are on the water take an additional 54 lbs with you and set it next to/or on the motor on the transom. That will tell you the drafting difference. Don't know the setup of your boat but if you could place a bucket or cooler next to the transom it will help you decide. 6.5 gallons of water is about 54 lbs in a cooler would work well. or about 66 cans of beer.

Work 2 fish 4 days
1988 vintage 1436 Fisher Jon
1992 vintage 15 hp Merc
1988 vintage 1436 Fisher Jon
1992 vintage 15 hp Merc
-
- Site Sponsor
- Posts: 436
- Joined: March 29th, 2007, 10:28 am
- Location: Tallahassee
E-Tec Okay!



If I had to replace the engine tomorrow, I'de definately go with another E-Tec, but more power!

My hobby is Smart Outdoors, LLC.