1999 ProMaster center console

Post by **trout fisher** » September 15th, 2003, 11:09 pm

This is a 19' cc with a 115 hp Johnson. Comes with a spare prop. It's sitting on an aluminum LoadMaster single axle trailer. Six rod holders are built into the console as well as 2 mounted on the transom for trolling. It has a huge live/baitwell molded into the console and also doubles as a front seat. It is equipped with a cooler seat as well. The boat has a 40 gallon fuel tank in the console which gives it good range. The 115 sips gas. I have taken it offshore but it is a flats/bay boat. It is in great shape. It came with carpet which is weathered and the gunwale hatches could use a reupholster job. Motor and hull are sound. I am keeping the electronics for my new boat. Primarily fished out of Econfina with a few trips to Keaton, Mex. Bch., and SGI. Skeg has the usual "paint wore off" but no tears or dings. Motor has been flushed and boat thoroughly cleaned after every trip. Can test run this boat at a lake a few miles from my house. Located in Norman Park, Ga., approx. 1 1/2 hrs. from Tally.

$8500.00

Click on my FISHINGWORKS link to see pictures. I will also post a few.

Post by **seatrout99** » September 16th, 2003, 8:01 am

I have fished from this boat several times. It is a great boat. Rides good whether it's flat or choppy. Runs shallow also. This would make someone a heck of a nice rig. Good all around boat for catching trout & reds or trolling for inshore grouper.

Post by **Chalk** » September 16th, 2003, 8:16 am

Ditto on what Seatrout said..nice rig...J.D. Power & Associates ranked it top boat in 1999

Post by **CSMarine** » September 16th, 2003, 9:09 am

Brother-in-law wants to come look at it. Lives about 20 miles from you. Check your PM.

Post by **trout fisher** » September 16th, 2003, 5:08 pm

CS, I called you at work but they said you'd just left. I'll try you at home around 6:00. ST and Chalk, thanks for the comments. Chalk, that's nice to know.

Post by **trout fisher** » February 27th, 2004, 10:46 pm

Alright fellas, come and get it!!!!

Post by **seatrout99** » February 29th, 2004, 10:51 am

Post by **trout fisher** » February 29th, 2004, 9:32 pm

Thanks Chris! FYI, hatch covers are being reupholstered next week.

Post by **Reel Country** » March 3rd, 2004, 1:04 pm

What's replacing it?

Post by **seatrout99** » March 3rd, 2004, 2:07 pm

He purchased a 23 Proline and is looking for money to repower it.

Post by **trout fisher** » March 5th, 2004, 9:50 am

That is correct.

I'd love to keep them both, but the wife and the pocketbook won't allow me.

Post by **Chalk** » March 5th, 2004, 10:03 am

A few of these should take care of one

Post by **trout fisher** » March 8th, 2004, 8:49 pm

That would heal alot of wounds.

ctipper · Post by **ctipper** » March 9th, 2004, 11:01 am

I would like to look at the boat. When are you available to show it?

Post by **trout fisher** » March 9th, 2004, 8:39 pm

Maybe Saturday evening. I leave before daylight and get home after dark most days. If this weather stays good I may have to work all day Saturday. I should be home before dark though. I'll p.m. my # to you and you can give me a call for more info if you'd like.