Page 1 of 1
					
				1999 ProMaster center console
				Posted: September 15th, 2003, 11:09 pm
				by trout fisher
				This is a 19' cc with a 115 hp Johnson. Comes with a spare prop. It's sitting on an aluminum LoadMaster single axle trailer. Six rod holders are built into the console as well as 2 mounted on the transom for trolling. It has a huge live/baitwell molded into the console and also doubles as a front seat. It is equipped with a cooler seat as well. The boat has a 40 gallon fuel tank in the console which gives it good range. The 115 sips gas. I have taken it offshore but it is a flats/bay boat. It is in great shape. It came with carpet which is weathered and the gunwale hatches could use a reupholster job. Motor and hull are sound. I am keeping the electronics for my new boat. Primarily fished out of Econfina with a few trips to Keaton, Mex. Bch., and SGI. Skeg has the usual "paint wore off" but no tears or dings. Motor has been flushed and boat thoroughly cleaned after every trip. Can test run this boat at a lake a few miles from my house. Located in Norman Park, Ga., approx. 1 1/2 hrs. from Tally.
$8500.00
Click on my FISHINGWORKS link to see pictures. I will also post a few.

 
			 
			
					
				
				Posted: September 16th, 2003, 8:01 am
				by seatrout99
				I have fished from this boat several times.  It is a great boat.  Rides good whether it's flat or choppy.  Runs shallow also.  This would make someone a heck of a nice rig.  Good all around boat for catching trout & reds or trolling for inshore grouper.
			 
			
					
				
				Posted: September 16th, 2003, 8:16 am
				by Chalk
				
			 
			
					
				
				Posted: September 16th, 2003, 9:09 am
				by CSMarine
				Brother-in-law wants to come look at it. Lives about 20 miles from you. Check your PM. 

 
			 
			
					
				
				Posted: September 16th, 2003, 5:08 pm
				by trout fisher
				CS, I called you at work but they said you'd just left. I'll try you at home around 6:00. ST and Chalk, thanks for the comments. Chalk, that's nice to know.  
  
 
			 
			
					
				
				Posted: February 27th, 2004, 10:46 pm
				by trout fisher
				Alright fellas, come and get it!!!!
			 
			
					
				
				Posted: February 29th, 2004, 10:51 am
				by seatrout99
				
			 
			
					
				
				Posted: February 29th, 2004, 9:32 pm
				by trout fisher
				Thanks Chris! FYI, hatch covers are being reupholstered next week.  

 
			 
			
					
				
				Posted: March 3rd, 2004, 1:04 pm
				by Reel Country
				What's replacing it?
			 
			
					
				
				Posted: March 3rd, 2004, 2:07 pm
				by seatrout99
				He purchased a 23 Proline and is looking for money to repower it. 
  
 
			 
			
					
				
				Posted: March 5th, 2004, 9:50 am
				by trout fisher
				That is correct.  

  I'd love to keep them both, but the wife and the pocketbook won't allow me.
 
			 
			
					
				
				Posted: March 5th, 2004, 10:03 am
				by Chalk
				
			 
			
					
				
				Posted: March 8th, 2004, 8:49 pm
				by trout fisher
				
 That would heal alot of wounds.  

 
			 
			
					
				
				Posted: March 9th, 2004, 11:01 am
				by ctipper
				I would like to look at the boat.  When are you available to show it?
			 
			
					
				
				Posted: March 9th, 2004, 8:39 pm
				by trout fisher
				Maybe Saturday evening. I leave before daylight and get home after dark most days. If this weather stays good I may have to work all day Saturday. I should be home before dark though. I'll p.m. my # to you and you can give me a call for more info if you'd like.