Cracked Poling Platform
Moderators: bman, Chalk, Tom Keels
Cracked Poling Platform
Hey guys, my poling platform has cracked in three spots at the top, right below the platform. I was hoping that one of you could point me in the right direction for a fix? Its a aluminum platform.
Thanks, Carson
Thanks, Carson
NO FLUKE!!!
LANARK MARKET!!!!
LANARK MARKET!!!!
-
- Site Sponsor
- Posts: 12120
- Joined: December 12th, 2001, 8:00 pm
- Location: Tallahassee
Re: Cracked Poling Platform
Waviel Porter at Porters' Marine,Woodville.
When he repairs it, it may crack someplace else,but not where he repairs it.
When he repairs it, it may crack someplace else,but not where he repairs it.
WHOSE FISH IS IT?
Re: Cracked Poling Platform
Of course, T-Top Guy (Gulf Coast Fabricators) is bound to do a good job, too.
To fish, or not to fish, . . . those are the answers.
-
- Site Sponsor
- Posts: 12120
- Joined: December 12th, 2001, 8:00 pm
- Location: Tallahassee
Re: Cracked Poling Platform
Glenn at Skinny Water Products in Woodville can do it too.
WHOSE FISH IS IT?
Re: Cracked Poling Platform
Waviel Porter at Porters' Marine,Woodville. is your best bet for your money ..
- Reel Cowboy
- Site Sponsor
- Posts: 5552
- Joined: September 22nd, 2006, 10:45 am
- Location: Dallas, Tx
- Contact:
Re: Cracked Poling Platform
Harmsway wrote:
Of course, T-Top Guy (Gulf Coast Fabricators) is bound to do a good job, too.
In the words of the great Doc Holliday, "I'll be your huckleberry"
Re: Cracked Poling Platform
Sea Dawg wrote:Waviel Porter at Porters' Marine,Woodville. is your best bet for your money ..
Ouch!!!
And to think, I was going to do it for free.
- Barhopr
- Site Sponsor
- Posts: 3736
- Joined: September 25th, 2006, 10:21 pm
- Location: Bainbridge/Beacon Hill
Re: Cracked Poling Platform
Zing!
I can vouch for The Gulf Coast guys. You should see the welds in the Alum. he did for me on a roof mounted rod tubes. After a year plus on the top of my truck and in the woods hitting over hanging limbs, not a crack in the welds yet.
I can vouch for The Gulf Coast guys. You should see the welds in the Alum. he did for me on a roof mounted rod tubes. After a year plus on the top of my truck and in the woods hitting over hanging limbs, not a crack in the welds yet.
VIVA la BT
_______________
_______________