All things having to do with boats, trailers, engines, electronics and accessories.
Moderators: bman , Chalk , Tom Keels
tin can
Site Sponsor
Posts: 12535 Joined: May 6th, 2002, 8:00 pmLocation: Tallahassee, Florida
Post
by tin can April 19th, 2004, 10:22 pm
Has anyone seen one of these?
What was I supposed to do today?
Chalk
Moderator
Posts: 11996 Joined: March 9th, 2002, 8:00 pmLocation: 30° 13' N, 85° 40' W
Contact:
Post
by Chalk April 20th, 2004, 6:15 am
Wevans might have to go and relieve himsef on this one
Nice for sure....
wevans
Site Sponsor
Posts: 12827 Joined: June 12th, 2002, 11:06 amLocation: Sopchoppy
Post
by wevans April 20th, 2004, 10:03 am
ME LIKEY
“Before you criticize someone, you should walk a mile in their shoes. That way when you criticize them, you are a mile away from them and you have their shoes.”
Sawbones
Site Sponsor
Posts: 235 Joined: December 17th, 2001, 8:00 pmLocation: Panama City, FL
Post
by Sawbones April 20th, 2004, 10:33 am
1725# aluminum boat + 300hp max rating= top end speed should break the sound barrier
Atticus
Site Sponsor
Posts: 1763 Joined: April 1st, 2002, 8:00 pmLocation: Tallahassee
Post
by Atticus April 20th, 2004, 1:17 pm
My soul aches for a boat like that
Does it have a hose in the fish box?
Sir reel
Site Sponsor
Posts: 6206 Joined: January 22nd, 2003, 11:35 amLocation: Tallahassee
Post
by Sir reel April 20th, 2004, 2:24 pm
FOR PETE'S SAKE ATTICUS!!!
Don't let'm know ya got a soul until after the exam
"Good Judgement" comes from experience, ... and a lot of that..... results from "Bad Judgement".
seatrout99
Site Sponsor
Posts: 1069 Joined: January 16th, 2002, 8:00 pmLocation: Climax, GA
Contact:
Post
by seatrout99 April 20th, 2004, 2:27 pm
I've seen a 22 - haven't seen a 24.............
I like the 18 footer with a 90 and tabs on it. Dennis just got one. Plenty of boat for the flats.
GeneO.
Site Sponsor
Posts: 284 Joined: February 23rd, 2004, 6:59 pmLocation: Tallahassee
Post
by GeneO. April 20th, 2004, 2:32 pm
tin can
Site Sponsor
Posts: 12535 Joined: May 6th, 2002, 8:00 pmLocation: Tallahassee, Florida
Post
by tin can April 20th, 2004, 10:06 pm
ST, what brand motor did Dennis get?
What was I supposed to do today?
tin can
Site Sponsor
Posts: 12535 Joined: May 6th, 2002, 8:00 pmLocation: Tallahassee, Florida
Post
by tin can April 20th, 2004, 10:33 pm
Sawbones, it's supposed to break 60 with a 225.
I'm kinda lookin seriously at this one. Wevans, I have a call in to get a price. I'll let ya know. You might wanna upgrade.
What was I supposed to do today?
seatrout99
Site Sponsor
Posts: 1069 Joined: January 16th, 2002, 8:00 pmLocation: Climax, GA
Contact:
Post
by seatrout99 April 21st, 2004, 8:28 am
Xpress Dealer in Bainbridge is also a Mercury dealer.
dstockwell
Posts: 4214 Joined: March 5th, 2002, 8:00 pmLocation: Valdosta, GA
Post
by dstockwell April 21st, 2004, 10:25 am
Thats purrty..
Mighty fast for sure.
Ken K
Site Sponsor
Posts: 712 Joined: December 11th, 2001, 8:00 pmLocation: Woodbury, Georgia
Post
by Ken K April 29th, 2004, 6:53 pm
We went some back way from Hartford Alabama on the way to Crestview Florida this past weekend. I saw a dealer that had a slew of what at the time I thought were these boats but now I'm not sure if it was "Xtreme" or "Xpress".
Ken
sharkboy
Site Sponsor
Posts: 98 Joined: November 30th, 2002, 8:49 pmLocation: Crawfordville, FL
Post
by sharkboy April 29th, 2004, 7:51 pm
Not wanting to change the subject but Ken, what were you doing in Hartford Alabama? (That's where I was incubated.)
I must fish.
Ken K
Site Sponsor
Posts: 712 Joined: December 11th, 2001, 8:00 pmLocation: Woodbury, Georgia
Post
by Ken K April 29th, 2004, 8:10 pm
Just passing through. My wife's grandmother is in the hospital in Crestview and that seemed the way to go from here.
Ken
