Who sells trailer axles?

[Swampcreek]

I cannot find an axle in south ga that will match mine. measurements are 4' 4" on springs and 66 1/2 on hubs. 5 on 4 1/2 lugs

single axle trailer on an 80s model mor ark jon boat. 3500 pound axle.. I'd like to get the springs and all and be done with it.

[One Keeper]

Lee Trailer Sales. Give Will Thompson a call. 850-878-0788. He'll fix you up.

[fishdux]

Call Connie Liles in Tallahassee. They will hook you up if you are doing the repair yourself.

[salty tiger]

Lee Trailer Sales. Give Will Thompson a call. 850-878-0788. He'll fix you up.

Agreed! I used Lee Trailers a few years ago for a new axle. They were great, and I felt the price was very reasonable.

[Swampcreek]

I called them, they can build me one for $400. My local welder can do that for less. I was hoping to find one already made that I can throw on there. Seems like I'm going to have to go the repaired route. I'd buy a new trailer before I spend half chasing an axle.

[DixieReb]

If your axle is broken and you are going to weld it, be careful. I've heard horror stories about welded ones breaking at the weld.

[fredhey]

Check at etrailer.com and you might find what you are looking for.

[leonreno]

I ordered some axles from here: http://www.sturdybuiltonline.com/ and got great results, shipped to the house. Email them and they may have what you need.

[spoton]

I replaced both axles on my trailer several years ago and got by far the best price from this place:

https://www.championtrailers.com/

They are located in Slidell, LA just this side of New Orleans. They will build to your specs and ship to you or you can do what I did and pick it up on your way to a Louisiana marsh fishing trip!

[Swampcreek]

Ordered one off of northern tools that was a complete kit. Still have to do some adjusting, I hope it works. I don't know why things cannot be simple.

[rockyg]

I don't know why things cannot be simple.

Things can be simple, or fast, or cheap.....just not all at the same time.

[DAWG FAN]

I would check with Anderson Trailers in Vada, Ga or Flint Machine Shop in Pelham, Ga

[flatbrokeI]

Try Agri-supply in Tifton or Valdosta, lot of trailer parts reasonably priced. You can look online to get an idea of what they have and price.

[leonreno]

This axle should work, spring set is adjustable from 49"- 54.5" with 67" hub faces. I bought these similar axles for my trailer, just larger

http://www.sturdybuiltonline.com/3500-l ... p_829.html

[Greenbone]

Hi-Tech Marine
1333 N East Ave
Panama City ,Fl
850 282 1684
They were least expensive in Tally area and replaced mine while I went to lunch .