Transom Vs Bow Mount Trolling Motors?????

All things having to do with boats, trailers, engines, electronics and accessories.
Image

Moderators: bman, Chalk, Tom Keels

Post Reply
User avatar
T Smith
Site Sponsor
Posts: 291
Joined: April 8th, 2004, 7:37 pm
Location: Tallahassee

Transom Vs Bow Mount Trolling Motors?????

Post by T Smith »

Can the head of a transom mount trolling motor be swiveled 180' and used on the bow? :smt017 For some reason I remember thinking or hearing this. Depending on the person I take fishing sometimes I like to fish the front or rear of the boat and it would be nice to be able to move the trolling motor accordingly. It probably depends on the model I'm thinking a Minn Kota riptide transom mount. I don't know why the motorguides always seem to be $50 more than a comparable minn kota.
User avatar
Chalk
Moderator
Posts: 11996
Joined: March 9th, 2002, 8:00 pm
Location: 30° 13' N, 85° 40' W
Contact:

Post by Chalk »

I have done it with a motorguide...Birdsall Marine makes a bracket for mounting a transom mount trolling motor on the bow...http://www.birdsallmarine.com/page29.html
User avatar
wevans
Site Sponsor
Posts: 12827
Joined: June 12th, 2002, 11:06 am
Location: Sopchoppy

Post by wevans »

Yes they can be swiveled around :thumbup: that being said though :-D I would not want to be doing it back and forth on a regular basis :thumbdown: You take the top off "so you can see and rearrange the wires, remove the screws holding the head to the shaft and twist it 180 degrees "the wiring determines the direction of the twist" :beer: :beer:
“Before you criticize someone, you should walk a mile in their shoes. That way when you criticize them, you are a mile away from them and you have their shoes.”
Image
User avatar
T Smith
Site Sponsor
Posts: 291
Joined: April 8th, 2004, 7:37 pm
Location: Tallahassee

Post by T Smith »

thanks wevans,

So its possible but definately not something your gonna do on the water, at least I'm not. And you probably don't want to do it a bunch of times cause you might loosen or bugger up the wires. My plan is to have a mounting bracket on the front deck and one on the polling platform and a plugin at each deck. So I can move it to either location.
:thumbup:
RC
Site Sponsor
Posts: 411
Joined: January 24th, 2004, 4:42 pm
Location: Albany Ga

Post by RC »

I used a transom mount trolling motor on a birdsall mount on the bow of my hell's bay. Minn Kota and I turned the head 180. no problem
User avatar
Eerman
Site Sponsor
Posts: 3671
Joined: February 11th, 2004, 9:05 pm
Location: Tallahassee

Post by Eerman »

The previous owner of my boat used one all the time turned around. I just ordered a bow mount that I'm going to put on the front. Just buy one of each :-D :-D
User avatar
T Smith
Site Sponsor
Posts: 291
Joined: April 8th, 2004, 7:37 pm
Location: Tallahassee

Post by T Smith »

OK, Thanks guys thats what I needed to know. I'll just buy a transom mount and move it as needed. It would be nice to just buy two but that will have to wait untill I get a real job!!! :thumbup:
Post Reply