Another year and another project....
Moderators: bman, Chalk, Tom Keels
- Flint River Pirate
- Site Sponsor
- Posts: 3639
- Joined: August 23rd, 2007, 12:35 pm
- Location: Lynn Haven, FL
- raywillsail
- Posts: 21
- Joined: February 28th, 2007, 3:59 pm
- Location: Fort Walton Beach
Re: Another year and another project....
Hey, Chalk-- it's looking good. I'm hoping to sail Slider over to Cedar Key for the small boat meet in May. If you're done by then, zoom out and show me how to catch a few fish while I'm plodding past your neck of the woods.
Here's some bluefish we caught last fall:
Yeah, I know. But they really are good smoked.
Ray
http://slidercat.com/blog/wordpress
Here's some bluefish we caught last fall:
Yeah, I know. But they really are good smoked.
Ray
http://slidercat.com/blog/wordpress
- Chalk
- Moderator
- Posts: 11996
- Joined: March 9th, 2002, 8:00 pm
- Location: 30° 13' N, 85° 40' W
- Contact:
Re: Another year and another project....
Got a request for some updated pictures on JEM's forum - been doing a little work here and there....floor battens are in, main floor cut out and one layer of glass, finished and glassed the forward compartment, rounded over the rub rail....did some demolition today ...cut out the integrated rod holders. Idea was good on paper, but didn't pan out in reality. Plugging along...one day she will float or sink.
Re: Another year and another project....
Looking good. Sure would be nice to use her this winter.
GULP! free since 1970.
Re: Another year and another project....
Looking good Chalk.
"You cannot change the wind, you can only adjust your sails." Del Suggs
- flatpicker
- Site Sponsor
- Posts: 339
- Joined: December 13th, 2006, 9:58 am
- Location: Thomasville, GA
Re: Another year and another project....
That thing looks good Chalk. What size kicker are you putting on her?
BTW, that's a nice aluminum trailer you got there!
BTW, that's a nice aluminum trailer you got there!
A bowl of oatmeal tried to stare me down, and won!
- Chalk
- Moderator
- Posts: 11996
- Joined: March 9th, 2002, 8:00 pm
- Location: 30° 13' N, 85° 40' W
- Contact:
Re: Another year and another project....
I have a 25 hp that I got from Flounder pounder...when you gonna post some pics of your project Whaler and pink sail boat?flatpicker wrote:That thing looks good Chalk. What size kicker are you putting on her?
BTW, that's a nice aluminum trailer you got there!
- flatpicker
- Site Sponsor
- Posts: 339
- Joined: December 13th, 2006, 9:58 am
- Location: Thomasville, GA
Re: Another year and another project....
Here's a couple that you've obviously already seen.Chalk wrote:I have a 25 hp that I got from Flounder pounder...when you gonna post some pics of your project Whaler and pink sail boat?
The pink sailboat will be a while. I hope to order plywood this week. Did you use luan for the entire hull?
A bowl of oatmeal tried to stare me down, and won!
- Chalk
- Moderator
- Posts: 11996
- Joined: March 9th, 2002, 8:00 pm
- Location: 30° 13' N, 85° 40' W
- Contact:
Re: Another year and another project....
I used Meranti on the hull and bulkheads....only luan I have used is on the decks...that's because i ran out of meranti....want to use Nidacore...but they like it better than I do for $ome reason
- flatpicker
- Site Sponsor
- Posts: 339
- Joined: December 13th, 2006, 9:58 am
- Location: Thomasville, GA
Re: Another year and another project....
I hear ya! I'm gonna go with Meranti as well. Good luck with the build. I'd like to see her sometime.
A bowl of oatmeal tried to stare me down, and won!
- Reel Cowboy
- Site Sponsor
- Posts: 5552
- Joined: September 22nd, 2006, 10:45 am
- Location: Dallas, Tx
- Contact:
Re: Another year and another project....
In the words of the great Doc Holliday, "I'll be your huckleberry"
-
- Site Sponsor
- Posts: 12120
- Joined: December 12th, 2001, 8:00 pm
- Location: Tallahassee
Re: Another year and another project....
Not a bad deal cost $9000 to get to Venezuela and only $1500 to get back.
WHOSE FISH IS IT?
- Chalk
- Moderator
- Posts: 11996
- Joined: March 9th, 2002, 8:00 pm
- Location: 30° 13' N, 85° 40' W
- Contact:
Re: Another year and another project....
With great regret - this project has got to go...too many irons in the fire - going back to school, full time job and parent and all the other things that seem to take precedence.
Selling the boat as is, the platform it is sitting on (aluminum ladder), little over 1.5 gallons of epoxy, some fiberglass and fillers and all the scrap pieces of mahogany plywood that I have left.
Comes with a 25 hp Tohatsu - that was running three years ago
Really only need to finish installing the front middle and rear decks, paint the inside...add a layer of glass on the outside and paint.
Boat is designed after a Gheenoe but has a sharp entry - designed to be a shallow water boat.
Price is $300 firm - the ladder, epoxy and fillers are worth that alone.
No takers and she may see a Viking funeral (that's what Barhopr suggested)
Email me at chalk03@gmail.com if interested - pickup in Panama City, FL
Selling the boat as is, the platform it is sitting on (aluminum ladder), little over 1.5 gallons of epoxy, some fiberglass and fillers and all the scrap pieces of mahogany plywood that I have left.
Comes with a 25 hp Tohatsu - that was running three years ago
Really only need to finish installing the front middle and rear decks, paint the inside...add a layer of glass on the outside and paint.
Boat is designed after a Gheenoe but has a sharp entry - designed to be a shallow water boat.
Price is $300 firm - the ladder, epoxy and fillers are worth that alone.
No takers and she may see a Viking funeral (that's what Barhopr suggested)
Email me at chalk03@gmail.com if interested - pickup in Panama City, FL
-
- Site Sponsor
- Posts: 648
- Joined: September 23rd, 2008, 7:00 pm
- Location: Crawfordville, Fl
Re: Another year and another project....
Wish I new something about boat building. Nice project Chalk
- Flint River Pirate
- Site Sponsor
- Posts: 3639
- Joined: August 23rd, 2007, 12:35 pm
- Location: Lynn Haven, FL