Trolling Motor

All things having to do with boats, trailers, engines, electronics and accessories.
Image

Moderators: bman, Chalk, Tom Keels

Post Reply
Dr. Jones
Posts: 84
Joined: May 15th, 2003, 10:37 am
Location: Tallahassee

Trolling Motor

Post by Dr. Jones »

Hi Everyone,

I have an Evinrude trolling motor that swings down off the front of my boat and it's not working. It plugs into a little 'outlet' at the front of the boat. I checked the outlet with a multi meter and it seems okay. When I hooked the trolling motor directly up to the battery it didn't do anything. I don't know much about electronics and was wondering if there is someone in or around Tally who deals with these sorts of things without charging an arm and a leg.

Thanks!

-Bill
User avatar
tin can
Site Sponsor
Posts: 12535
Joined: May 6th, 2002, 8:00 pm
Location: Tallahassee, Florida

Post by tin can »

Dr. Jones, how old is the trolling motor? Is it hand or foot controlled? If it's 1999 or earlier, and foot controlled, the most common problem is the momentery foot switch.
What was I supposed to do today?
Dr. Jones
Posts: 84
Joined: May 15th, 2003, 10:37 am
Location: Tallahassee

Post by Dr. Jones »

I have no idea how old it is, but I'm almost certain it's mid-90s or earlier. It is foot controlled.
User avatar
wevans
Site Sponsor
Posts: 12827
Joined: June 12th, 2002, 11:06 am
Location: Sopchoppy

Post by wevans »

I got all new switches for my foot control TM from these folks for around $70 "I think" last year :thumbup: it is fairly easy to replace all of them, so long as you take your time :-D :beer:
http://www.trollingmotorparts.com/
“Before you criticize someone, you should walk a mile in their shoes. That way when you criticize them, you are a mile away from them and you have their shoes.”
Image
User avatar
tin can
Site Sponsor
Posts: 12535
Joined: May 6th, 2002, 8:00 pm
Location: Tallahassee, Florida

Post by tin can »

You should be able to look on the bottom side of the pedal and see the foot switch without taking it out. Jump across it and see if the motor works.
What was I supposed to do today?
Dr. Jones
Posts: 84
Joined: May 15th, 2003, 10:37 am
Location: Tallahassee

Post by Dr. Jones »

Thanks, guys! I will try to figure it out.
Jumptrout51
Site Sponsor
Posts: 12120
Joined: December 12th, 2001, 8:00 pm
Location: Tallahassee

Post by Jumptrout51 »

Take it to TinCans' house to be repaired. He has absolutely nothing else to do. He just sits around spending his tournament winnings and giving advice.
User avatar
tin can
Site Sponsor
Posts: 12535
Joined: May 6th, 2002, 8:00 pm
Location: Tallahassee, Florida

Post by tin can »

Yup. Got righ off of the last tournament. And, I always have plenty of advice. :-D
What was I supposed to do today?
Jumptrout51
Site Sponsor
Posts: 12120
Joined: December 12th, 2001, 8:00 pm
Location: Tallahassee

Post by Jumptrout51 »

Hey Tin Can save $5 for a gallon of gas to fish the next club tournament. Short Reel needs some competition. He's the prevailing champion for 2 or 3 tournaments straight. Just think how hard he would be to beat if all his fish would measure.
User avatar
tin can
Site Sponsor
Posts: 12535
Joined: May 6th, 2002, 8:00 pm
Location: Tallahassee, Florida

Post by tin can »

I'd love to, but I'll be in South Carolina. I'll send Birddog in my place. Maybe he can give SR some competition.
What was I supposed to do today?
Post Reply