Redbelly's attack vessel

Post by **Redbelly** » January 2nd, 2007, 7:39 pm

Got to get it to the boat doctor and get the yammy fixed! Chomping at the bitts rite now

Wiil report on the maiden voyage and put up more pics, as I am learning to use my new dig cam and how to post pics!

Post by **Chalk** » January 2nd, 2007, 7:43 pm

Looks like a good creek hopper

Post by **birddog** » January 2nd, 2007, 7:46 pm

Looks ghoot. Go see Wavel Porter and get a skeg guard NOW. You'll be glad you did.

Post by **Redbelly** » January 2nd, 2007, 7:49 pm

Yes to Wavel soon, after the visit to boat doctor.

Post by **wevans** » January 2nd, 2007, 7:54 pm

Looks SWEETTTTTT

what's ailing the Yammy?

Post by **Redbelly** » January 2nd, 2007, 8:22 pm

it sat up for almost 2 yrs. We cranked her and BACKFIRE! Still it cranked and ran fine, smooth.
Reminds me of a go-devil sounding engine.
We blew a carb gasket, and gas was pouring out. This motor has 3 carbs.

Gonna get the water pump new, change foot oil, and generally have him give it a physical.

Then we're OFF!!

Post by **rocket** » January 2nd, 2007, 9:19 pm

Wavel can handle all that. One stop shop.
Looks good

, let me know how you like those sponsoons/floatation pods.

Post by **Eerman** » January 2nd, 2007, 9:31 pm

Post by **reel therapy** » January 2nd, 2007, 9:33 pm

Nice. Reel nice.

When we going creek hopping?

Post by **mjsigns** » January 2nd, 2007, 10:27 pm

That looks like an "Aucillia" Machine, without the skegg guard....

Post by **Barhopr** » January 3rd, 2007, 8:46 pm

Looks dangerous.......
...............................
............to the fishes

Post by **Will_Fish_4_Food** » January 3rd, 2007, 10:53 pm

Was it previously set up with a jet foot, or is that the light on the pic making the colors different? I would be interested in hearing about how it performs. Speed/ride, etc.

I too would recommend Porter Marine for service. Congrats on the rig

Post by **Barhopr** » January 3rd, 2007, 11:36 pm

In the 4th picture, what is that near the bottom of the port sponson? Looks like a fixed trim tab.

Post by **Welby** » January 4th, 2007, 7:57 pm

Like that boat Redbelly !!!!!!! Look forward to some reports .....

Post by **Redbelly** » January 5th, 2007, 7:47 am

WF4F the flash went off on that picture.

Barhopr I think that is a fixed step. I will ask about that.

I noticed the poling platform seems a little higher than most others.