200 HPDI on a 21 ft bay boat. Great motor. Fuel efficent and smooth. Hell of a difference between a carbed and fuel injected motor. Starts soooo easy. Idles and slow trolls smooth. My old carbed premixed motors never liked to idle or slow troll. No problems here.
I just like 2 strokes. Lighter, simpler mechanically, more torque, and I like the sound.
Glad to see evinrude has got their stuff together with the Etec. I'll let them get a few more years on them and see how they do. Next motor will probably be an Etec. I grew up with Johnsons and changed to Yamaha after the FITCH fiasco.
Who runs what motor?
Moderators: bman, Chalk, Tom Keels
- Team Bad Company
- Posts: 192
- Joined: January 27th, 2007, 3:03 am
- Location: Tallahassee, Alligator Point
trip Crusader 315hp 350s... excellent motors... moving to the 375hp 366s VERY soon...
and a 4 horse Yam / 43lb motorguide on the g-new
and a 4 horse Yam / 43lb motorguide on the g-new
Last edited by Team Bad Company on April 25th, 2007, 3:35 pm, edited 1 time in total.
-
- Site Sponsor
- Posts: 385
- Joined: January 2nd, 2002, 8:00 pm
- Location: McDonough, ga
Twin 135hp Opti Max Mercurys on the Mako. Bought them new with the boat in 1998. Except for the port engine being a little cold natured on the initial start up I have been very pleased. No smoke, smooth at idle, run great and they have never let me down. Only have about 400 hrs on them. Which means I work way too much and fish way too little
I do have them serviced yearly. Also have a four stroke 40hp jet, 60hp head, Yamaha on the 1652 G3. Quietest motor I have ever owned. As with all four strokes it turns up slower than a two stroke. Hard to compare gas milage since it is a jet. Had it two years and so far no complaints.
